Data Industrial Insertion Style Flow Sensors - 220 Series
220 Series sensors are specifically designed for installation in underground vaults that might be subjected to flooding. As the liquid flow turns the impeller, a low impedance 8V DC square wave signal is transmitted with a frequency proportional to the flow rate. This signal can travel up to 2,000 feet between the sensor and the display unit without the need for amplification.
220 Series sensors are specifically designed for installation in underground vaults that might be subjected to flooding. As the liquid flow turns the impeller, a low impedance 8V DC square wave signal is transmitted with a frequency proportional to the flow rate. This signal can travel up to 2,000 feet between the sensor and the display unit without the need for amplification.
BENEFITS
- Cost savings over other systems offered on the market today
- Impeller, bearing and shaft are easily replaced in field without changing calibration
- Impeller shape coupled with the absence of magnetic drag provides accuracy and repeatability
FEATURES
- Six-bladed impeller design with a proprietary, non-magnetic sensing mechanism
- Sensor electronics easily removed from tee
- Two-wire sensor—power and signal transmit on a single pair of wires up to the distance of 2000 feet
- Flow indicators are configured with two 48 inch single conductor leads
- Digital signal easily interfaced with transmitters, monitors, or PLCs
SPECIFICATIONS
- Size: 1/2...4 in.
- Temperature Range: Up to 221°F
- Flow Range: 0.3...30 ft/sec
- Pressure Range: Up to 400 PSI
- Accuracy: ±1%
